CORROSION PROTECTION ADDITIVES FOR OIL AND LUBRICANTS

Nox-Rust 1100 Volatile (Vapor) Corrosion Inhibitor

Lubricating liquid additive for use in the preservation of ferrous and/or other metal parts in enclosed oil systems.  Meets military specification Mil P-46002

By combining the protective properties of preservative oil with Daubert VCI proprietary volatile corrosion inhibitors (VCI), Nox-Rust 1100 liquid provides long-term protection against rust in closed systems or voids.

Typical examples of closed systems include fuel tanks, storage tanks cylinders, transmissions, oil bath, gear boxes, engine oil, pressure fluid, hydraulic and coolant circulating systems. It may also be fogged into shipping

cases to protect unpainted auto and truck body sections during shipments.  It can also be used for winter lay-up of farm and road building equipment and for summer storage of school buses, snowplows, snowmobiles.

VCI Oil Additive Performance

Performs to Mil P-46002A

100% RH @ 120 F 300 hours

Vapor phase Corrosion Protection, Mil-P-46002A

Procedure: Pass

Removal: Not necessary

 

Packaging and Storage

Nox-Rust 1100 is available in conveniently sized 5 gal (18.9 l) pails and 55 gal (208 l) drums.

Store sealed, in a dry location, out of direct sunlight in temperatures not to exceed 100°F

(40°C) or below 40°F (5°C). 

Corrosion Protection Store   Lubricating Corrosion Protection   Corrosion Protection Site

| VCI SELECTION HELP | Free evaluation of your corrosion control requirements | Selection Guide | VCI Additives Oil | Chemical Descriptions | Coatings | Cleaning / Degreasing | VCI Plastic | Polymer MB | Industrial Quick List | Daubert VCI Emitters | Electrical | Hydrotesting | Lay Up & Storage | Military Specs | Mothballing | Catalogs Index | VCI Packaging | Tower Layup | VCI Degreaser | Water Treatment | Corrosion Protection Slide Shows | Safe Rust Remover | Steel Coil Protection | Quotations | Biodegradable Products | Antistatic | Corrosion Control Canada | Mobile Site | Terms |