VCI Water Based Cleaner & Degreaser

VAPPRO 800

Water Based, Concentrated Metal Degreaser Formulation
Non-flammable
Low VOC
Heavy-duty chemical cleaner and degreaser with unique cleaning action
Leaves a very very thin dry protective layer of corrosion protection (less than 0.0001 inch)
In most cases be coated over after application without affecting adhesion  however; it is recommended you perform your own testing to be certain
Use is 2 % up to 20 % in water
Provides multi-metal corrosion protection

Typical Applications:

  1. Used for universal cleaning applications
  2. Can be used with a defoamer where required
  3. Machinery, parts or engines coated with grease or oil deposits
  4. Sheet metal covered with oil or soils
  5. Maintenance of equipment, rolling stock, machines, trucks and autos
  6. A final cleaning / corrosion inhibitor treatment prior to packaging parts
  7. Removal of temporary coatings 

 

Typical Properties:

Appearance: Clear, amber liquid

pH (1% aqueous): 8  -  9

Weight per gallon: 7.9  -  8.1

Non-volatile Content: 48 - 52%

 

Preparation for Application:

For cleaning applications use 2 % up to 20% by volume of Vappro 800 Cleaner in water.   For heavy-duty cleaning, allow the cleaner to penetrate through the dirt and grime.

 

Storage / Packaging:

Vappro 800 Cleaner/Degreaser is available in 20 litre, 5.3 us gallon pails and drums. The shelf life of this product is 24 months.

| VCI SELECTION HELP | Free evaluation of your corrosion control requirements | Selection Guide | VCI Additives Oil | Chemical Descriptions | Coatings | Cleaning / Degreasing | VCI Plastic | Polymer MB | Industrial Quick List | Daubert VCI Emitters | Electrical | Hydrotesting | Lay Up & Storage | Military Specs | Mothballing | Catalogs Index | VCI Packaging | Tower Layup | VCI Degreaser | Water Treatment | Corrosion Protection Slide Shows | Safe Rust Remover | Steel Coil Protection | Quotations | Corrosion Control Canada | Mobile Site |