INDUSTRIAL VCI COATING DESCRIPTIONSProven VCI temporary heavy duty outdoor barrier corrosion protection coating provides 1 to 5 years corrosion protection to bare metal parts or painted surfaces. Apply to clean or rusted metal surfaces to give superior VCI protection, including water and salt spray resistance. Dries to a firm dry to touch clear corrosion protective coating. Can be removed with many common water based degreasers. Provides requirements of Mil C-161793 Rev E. Class 1 Grade 4 and Mil PRF-16173 Rev E. Grade 4 Package: 5 gallons or 55 gallon drums
Corrosion protective coating designed to protect metals when exposed to outdoor weather conditions and for general purpose preservation, indoor or outdoor, with or without cover, for domestic and overseas shipment where a "dry to touch" film is required. Can be removed with a degreasing wash, steam or common industrial wax remover. Black color dry to touch temporary coating Salt Spray 336 hours; humidity cabinet 1200 hours Package: 5 gallons or 55 gallon drums
Daubert VCI Nox-Rust 4101 is designed specifically for acid fume inhibition such as in pickling operations and where corrosion protection storage of bare metals in a high humidity environment is required. Passes MIL-C-16173D Grade 3, Mil PRF-16173 Rev. E., Ford and Armco Steel Corp tests. Removable.Package: 5 gallons or 55 gallon drums
Solvent-based barrier coating that provides extended, outdoor multi-metal protection. Semi-dry, translucent, self-healing, and scratch resistant film. Dilutable. Spray, roll, brush, or dip. Remove with common solvents. Conforms to MIL-C-16173D Grade 1. Package: 12 oz. (0.33 liters) aerosol
Liquid oil based lubricant and corrosion preventative, General Motors spec 998-1833 and Ford Spec M4B90A approved. Provides exceptional performance when applied @0.5 mil thick as a coating or when used as a forming lubricant. Humidity Cabinet, Stack Tests and Zincrometal test results 500+ hours without incidence of corrosion. Passes Ford Motor Company Acid Atmosphere Test BJ7-J. Leaves an oily, non-drying, non-drip finish @ 0.5 mil thick. Easily removed with conventional methods. Package: 5 gallons (19 liters) and 55 gallons (208 liters) drums.
Water-based, air-dry, permanent, hard barrier coating that provides extended outdoor protection for multi-metals. Available in colors and as clear coat. Average performance results 168 hours, ASTM B-117 Salt Spray Test @ 1-2 mil DFT (Dry Film Thickness) Low VOC 0.75 lbs/gallon This Daubert Corrosion Coating provides up to three times the protection of similar water based VCI coatings. Package: 5 gallons (19 liters) and 55 gallons (208 liters)
Wax-based, air-dry, temporary, dry to touch barrier coating that provides extended outdoor protection for multi-metals. Conforms to Mil-C-16173, Rev. D, grades 2,3,and 4. Package: 5.3 gallons (20 liters) and 55 gallons (208 liters)
Environmentally safe water based barrier VCI coating for bare metal parts or industrial finishes to provide corrosion protection. Water based easy to use metal corrosion control available in 5 gallons or 55 gallons. Very thin, very clear coating. Dries to a dry, non-tacky finish. Removable.
VCI temporary transparent, non-discernable coating leaves parts with a shiny luster. In most cases the film does not require removal. Provides temporary indoor corrosion protection for parts stored indoors and up to 3 - 5 years corrosion control when combined with VCI plastic packaging or VCI paper packaging. Repels water from metal surfaces. Can be removed with common water based degreasers such as our Vappro 800 Package: 5 gallons or 55 gallon drums
Ultra-thin VCI rust and corrosion preventative Can be diluted with water or petroleum solvents. Water Displacing corrosion inhibitor can be used as a rinse additive, flow coat or apply by brush, spray or dip. Removable. For use on ferrous metals including cast iron. Popular use is for corrosion protection during the processing, shipping & storage of metal parts. Package: 5 gallons (19 liters) and 55 gallons (208 liters)
Excellent oil-based rust preventive in outdoor covered (sheltered exposures) Removable. Custom colors available. Dilutable and Non-polluting. Package: 5 gallons (19 liters) and 55 gallons (208 liters)
Provides up to six months indoor exposed corrosion protection Fed Spec VV-L-800 When packaged or used for enclosed components will give as much as 12 months
protection against corrosion Nox-Rust 7800 differs from ordinary corrosion preventive liquids in that it is
also an excellent lubricant for fine components even at very low temperatures
Coverage 2,000 sq. ft. per gallon, Viscosity SUS @ 100°F 66-70, Pour Point - 70 F
Additional Corrosion Control Coatings and products can be found at our sister site Corrosion Control Corrosion Protection VCI Products Store VCI Packaging VCI Paper VCI PowderNeed help with your corrosion inhibitor selection? Click here --> [ Home ] [ REQUEST QUOTES ] [ Corrosion Control ] [ VCI Works ] [ Applications ] [ NEWS ] [ VCI Selection Help ] [ Rust Protection ] [ Rust Removing ] [ Save Money ] [ VCI Paper ] [ Lubricants ] [ VCI PLASTICS ] [ Vapor Barrier Foil ] [ Food Grade ] [ Applications ] [ VCI Emitters Corrosion Protection ] [ VCI Vapor Corrosion Inhibitor Foam Inserts for Corrosion Protection ] [ Photo Gallery ] [ NDT F.D. Test Kit ] [ Payment Terminal ] [ FDA Compliant ] [ Biodegradable Films ] [ Silver Guard ] | 
