Rust Removing Products       Rust Remover Blog

| Biodegradable Rust Removers | Rust Removing FAQ | Rust Removing Applications | Rust Remover Discuss |

 

Safe Liquid Rust Removers

 

KPR Liquid Rust Remover

Effectively removes rust and tarnish from carbon steel, stainless steel, cast iron, brass, copper, aluminum and ferrous metals.  Non-polluting. Will not harm human skin or adversely affect most paints, plastics, wood, textiles, ceramics or rubber.  Biodegradable, nontoxic, user friendly, non-flammable product that is safe on hands. Easy to use it reduces maintenance, increases productivity, and decreases costs.  Safer than other products, this rust remover is near Neutral in pH   This liquid rust remover does NOT require a neutralizer.
Package: 5 gallons (19 liters) and 55 gallons (208 liters)

| KPR Safe Rust Remover FAQ | KPR Rust Remover Data |

Evaporust Liquid Rust Remover

Used by thousands of satisfied customers world-wide such as the US armed forces, engine builders, auto restorers, manufacturers, hobbyists, weapons restorers, and more. EVAPO-RUSTâ„¢ is a rust remover which reduces maintenance, increases productivity, and decreases costs.  NSN 6850-01-498-3610  It is also biodegradable and near neutral in pH.
Package: 5 gallons (19 liters) and 55 gallons (208 liters)

Safe Rust Remover FAQ

The product features information discussed at Safe Rust Remover FAQ applies to both of the biodegradable, non-hazardous, non-flammable safe rust removers mentioned above.

Liquid Rust Remover Slide Show

A slide show presentation about how to use our liquid rust removers for a variety of applications.

 

Rust Remover Jelly (Gel) Corrosion & Rust Remover

Rust and Corrosion remover in Gel (Jelly) form.  Excellent rust remover for vertical and overhead surfaces.  Biodegradable, non-hazardous rust remover jelly.    Contains rust remover and flash corrosion protection.
Package:  0.5 gallon jugs  and  6 x 0.5 gallon jugs Carton    Visit our rust remover store.

| KPR Safe Rust Remover FAQ | Rust Remover Gel Data Sheet |

Rust Convertor Converts Rust to Protective Primer

Rust Converter is a direct to rust primer for difficult to adhere to surfaces.  It can be applied directly to rusted metal surfaces and it will penetrate to the metal surface, eliminate rust, seal, prime and convert all rust to a smooth ready to top coat rust free surface.   It prevents further rusting.  Great for marine environments and the presence of chloride s.  It is a water based, low VOC, non-flammable, non-toxic coating that provides up to ASTM Salt Spray 500 hours of corrosion protection @ 3 MIL DFT.  It can be top-coated with water or solvent based coatings.
Package:  Four x 5 litre jugs  and 55 gallon drums

 

Rust Remover Kits

Rust Removal Kits include safe rust remover, degreaser / neutralizer in convient easy to use pump spray bottles visit our online store to purchaseOne 16 oz liquid bottle of each, biodegradable safe rust remover and greaser/neutralizer.
This item has been discontinued due to the new and improved products above that do not require a final rinse after application.

 

Metal Cleaning  and  About Rust Removing (Removal) Products

 

Where to Buy Corrosion Protection VCI Rust Control Products Online

VCI Products-Store  The place to buy VCI  Products

VCI Corrosion & Rust Control Products Store  A large categorized internet shop with pictures and short descriptions of VCI Temporary Coatings, VCI paper, VCI poly (plastic), cleaners, degreasers, mil spec products, VCI Emitters, static control packaging, Daubert Nox-Rust Liquids and more available for purchase online.

VCI Industrial Corrosion Control Packaging  The place to shop for VCI plastic packaging, vci pallet wrap, vci film sheets and vci bags.  Recyclable rust control poly (plastic) film, sheets and bags.

VCI Paper rust and corrosion control paper in a variety of shapes, constructions and grades.

 

FAQ'S

Q. Is there a specific way to use a rust remover?
A. Yes, there is. When you want to remove corrosion from a surface there is a basic process you must follow. First, the part should be cleaned of any oil and/or debris. This gives the rust remover easy and direct access to the corrosion on the surface of the part.  This is performed by degreasing and a fresh water rinse to wash away any residue from the degreaser.

If using those other brand acid rust removers the the part should be rinsed with an alkaline cleaner to help neutralize the surface.  This step is critical because those other brand rust removers leave a low pH or acid on the surface of the metals. Acids are corrosive and the metal will develop corrosion again fairly quickly.   Once neutralized the part is ready for further processing.

When using one of our brands of KPR Rust Removers the extra step of neutralizing the metal is not necessary. Our rust removers leave the metal in a neutral pH state. Kpr's staff will be happy to help you select the proper products for your application.

When using our liquid biodegradable rust remover this step is not necessary, but a fresh water rinse is recommended if the part is to be coated, surface treated or if medium to long term corrosion protection is required.


Q. My product information sheet says to apply a VCI coating at 1.5 mils DFT. What does DFT stand for and how do I know if I have applied the proper coating thickness?

A. DFT stands for dry film thickness. You may also see the abbreviation WFT for wet film thickness. Second, there are two ways to determine if you have the proper coating thickness.  

The first method for determining film thickness is to use an electronic thickness gauge.  This unit is used after the coating is dry, and is simply placed on a painted surface and electrically determines the thickness of the coating. These units are fairly accurate but can be expensive to purchase.  The disadvantage of an electronic unit is that it can not be used until the coating is dry.  

A better tool for most customers is a wet film gauge. Wet film gauges are inexpensive, sometimes as low as a few dollars, and are used while the coating is wet. This allows you to add extra paint if there is too little on the part. To use a wet film gauge you must know what wet film thickness is required for desired dry film thickness.

 

For help with your rust removal project click on the rust remover selection form

 

| KPR Rust Remover Liquid | KPR Rust Remover Gel | Rust Remover Store | Rust Remover Slide Show | Rust Removing Photos | Rust Remover FAQ (Frequently Asked Questions) | Safe Rust Remover Liquid | Rust Remover Help Form |

 

| Free evaluation of your corrosion control requirements | Rust Removing Products | Rust Remover Applications | Rust Remover Blog | KPR Liquid Rust Remover | Evaporust Liquid Rust Remover | Safe Rust Remover FAQ | Rust Remover Gel | Rust Remover Gel Carton | About Rust Removing Products | Liquid Rust Remover Slide Show | Cleaning | V-800 Cleaner/Degreaser | VCI Poly | Biodegradable Film | Industrial Quick List | Daubert VCI Emitters | Electrical | Hydrotesting | Lay Up & Storage | Military Specs | Mothballing | Catalogs Index | VCI Packaging | Tower Layup | VCI Degreaser | Water Treatment | Corrosion Protection Slide Shows | Rust Removal | Quotations