Nox-Rust 5100 501-LS Corrosion Coating

Details 

Nox-Rust 5100 Petroleum Outdoor Corrosion Inhibitor Corrosion protective coating designed to protect metals when exposed to outdoor weather conditions and for general purpose preservation, indoor or outdoor, with or without cover, for domestic and overseas shipment where a dry to touch film is required. Nox-Rust 501 LS meets Mil PRF-16173 E Grade 1 requirements. Salt Spray 336 hours; weatherometer 1200 hours,

Nox-Rust 5200 502 LS Corrosion Coating

Details 

Corrosion preventative for metal parts and equipment that is stored indoors for long periods of time up to 5 years. Completely miscible with oils.
Nox-Rust 502 L.S. is on the Qualified Products list for Mil PRF-16173E Grade 2

5 us gallons, 55 gallons or aerosols

Nox-Rust 5300 503 LS Internal Coating

Details 

Nox-Rust 5300 Corrosion Protective Coating for Indoor or Outdoor Sheltered Excellent oil-based rust preventive in outdoor covered (sheltered exposures) Removable. Custom colors available. Dilutable and Non-polluting.
Nox-Rust 503 LS Mil PRF-16173E Grade 3 Class 2 specification.
Package: 5 gallons (19 liters) and 55 gallons (208 liters)

Nox-Rust 5400 X-241-M Lubricating Coating

Details 

Nox-Rust 5400 X-241M Lubricant & Corrosion Coating Liquid oil based lubricant and corrosion preventative, General Motors spec 998-1833 and Ford Spec M4B90A approved. Provides exceptional performance when applied @0.5 mil thick as a coating or when used as a forming lubricant. Humidity Cabinet, Stack Tests and Zincrometal test results 500+ hours without incidence of corrosion. Passes Ford Motor Company Acid Atmosphere Test BJ7-J. Leaves an oily, non-drying, non-drip finish @ 0.5 mil thick.

Nox-Rust 7100 Ultra Thin Corrosion Protection

Details 

Nox-Rust 7100 Corrosion Control Very Thin Temporary Coating VCI temporary transparent, non-discernable coating leaves parts with a shiny luster. In most cases the film does not require removal. Provides temporary indoor corrosion protection for parts stored indoors and up to 3 - 5 years corrosion control when combined with VCI packaging. Repels water & soluble cutting fluids from metal surfaces. Will not emulsify in the presence of alkali. Can be removed with common water based degreasers such as our Vappro 800

Nox-Rust 9900 Water Based Coating

Details 

Nox Rust 9900 Aqueous Clear Outdoor/indoor Barrier Corrosion Coating Environmentally safe, non-flammable water based barrier VCI coating for bare metal parts or industrial finishes to provide corrosion protection.

Very thin, very clear barrier coating. Dries to a dry, non-tacky finish. ASTM B-117 150 Salt Spray hours, humidity cabinet 200 hours. LOW VOC of 0.4 lbs/gallon. Removable.

V-870CB Electrospray

Details 

Electrospray V-870CB Six 500 Mil Each Bottles/Carton

Provides corrosion protection to electronics & electrical panels, circuits, contacts and all metal surfaces inside an enclosure. Ships ground only. Non-conductive ultra thin molecular corrosion protection.

Vappro 9868 Mil C-16173D Grades 2,3,4

Details 

Vappro 9868 5.3 US gallons (20 Litres) fulfills requirements of Mil C-16173D Grades 2,3,4
Leaves a transparent dry to touch film that is resistant to salt spray & humidity

20 litre pails out of stock
AEROSOLS ONLY