HOW TO USE EVAPO-RUST

nCOMPLETELY IMMERSE  ITEM  *

n

nEVAPO-RUST is easy to use. Fully immerse the rusted item in EVAPO-RUST and check progress in about 30 minutes; no scrubbing necessary. Soak times will vary from 30 minutes to 24 hours depending on severity of rust, type of steel, and temperature. EVAPO-RUST is water based, therefore the active molecules will slow down as temperature decreases and increase as temperature increases. We recommend utilizing EVAPO-RUST at a bath temperature above 60° F (normal room temperatures).

n

nOnce rust is removed, rinse item with water. 

nYou can now paint, plate, or apply a long term Corrosion Preventative Compound such as Nox-Rust 3100, Permanent Coating, Corrosion Inhibitor or VCI protective packaging.

nFor short term rust inhibition, simply dip the item in EVAPO-RUST and allow to dry. 

nFor longer term protection use VCI Paper or VCI plastic film packaging.

nRinse with ordinary water before painting, plating or applying a surface protective corrosion inhibitor or coating.

n

n* For items too large for immersion call 1-866-577-2326 and ask about the PATCH

Pictures from SIMA-San Diego Naval Facility